24 Port UTP 19 inch Cat6 network Wall Mount Surface Patch Panel
Specifications:
| Cost difference facts | Linknet patch Panel | General factories |
| Contacts | 0.018''(0.45mm) Phosphor bronze wth 50 micro inches(1.27 micron) | metal with bronze plating |
| Insertion & withdrawal | Min.750 cycles | Max. 200cycles |
| Package | E-P bag with strong carton | cheap bag with carton |
| blank patch panel | 1.6mm thickness cold-rolled steel | 1.2mm metal plate |
Product Description:
STP Cat.6 2-port shield patch panel can be mounted in 19'' racks .
Cat.6 Marks on it with silk printed technique.
The Panel has the pin connection scheme of T568A and T568B.
Cable Clamping clips and grounding provide shielding contnuity. The
Cover which is fixed on the panel protexts panel conacts from outer
electromagnetic fields. There is an rear cable manager for cable
fixation with ties.
Standard requirements:
Meets ANSI/TIA/EIA-568-B.2 Category 6 requirements.
Meets TIA/EIATSB-40
Meets ISO/IEC Generic Cabling Standard 11801:2002 ed.2.0
Meets CENELEC Generic Cabling Standard EN50173-1:2002.
Description :
19'' installation in racks.
1U in height
Material :
Housing:0.06''(1.6mm) thicknss steel.
Cover:0.039''(1mm) thickness steel.
PCB(Printed circuit board): FR-4 0.06''(1.6mm) thickness,2/ayers.
Contacts: 0.018''(0.45mm) Phosphor bronze wth 50 micro inches(1.27
micron)
Gold plating on contact area
IDC: PC UL94V-O
Electrical Characteristics:
According to UL1863
Current rating :1.5A Max
Voltage Rating: 150V
Contact resistance: 20m-ohm
Insulation resistance:500M-ohm
Dielectric withstand voltage:1000V AC RMS,60Hz/min.
Application
1. RJ45 jack frame material: PBT, golden clad phosphor bronze pins;
Shielding shell
of the RJ45 jack; Brass housing with nickel plate; IDC clip: Tinned
phosphor
bronze pins.
2. Fitting for 22AWG/23AWG/24AWG cables, Punching dependability:
750 times.
3. Cabling sequence: T568A & B.
4. Punching tools: Standard 110 or LSA type punching tools.
